Extension modules

10 Gbit Ethernet upgrade kit for Airtop3 (Intel X550-T2 dual GbE). The kit consists of the card pre-assembled...

Nvidia GeForce RTX4060 upgrade kit for Airtop3. The kit consists of the card pre-assembled to an Airtop3...

Nvidia GeForce GTX1660 upgrade kit for Airtop3. The kit consists of the card pre-assembled to an Airtop3...

Nvidia RTX 2000 12GB upgrade kit for Airtop3. The kit consists of the card pre-assembled to an Airtop3...

NVM3 upgrade kit for Airtop3. NVM3 allows adding up to 3 NVMe SSDs, each up to 22110. The kit consists...

Quadro RTX 4000 upgrade kit for Airtop3. The kit consists of the card pre-assembled to an Airtop3...

FC-CEM has B-Key M.2 socket 3042 (with connected SIM-card socket) + E-Key M.2 socket 2230 + M-Key M.2 socket 2280/2260 The comm...

FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports. Ethernet controllers: Intel I211. Notes: Does not affect M.2 SSD (M.2 SSD 2260 can be installed with FC-M2LAN) Cannot be installed together with internal WiFi. If WiFi is needed please consider WiFi USB dongle Technical documentation: FC-M2LAN FACET CA...

FC3-LAN adds dual Gbit Ethernet ports to fitlet3 for a total of 4 ports. Ethernet controllers: Intel I2...

FC3-LAN2G5 adds dual 2.5 Gbit Ethernet ports to fitlet3 for a total of 4 ports. Ethernet controllers:...

FC3-SC-C2 FACET card adds 2x DB9 with CAN bus to fitlet3 Two CAN bus interfaces using DB9 connectors Supports CAN 2.0A Specifications and ISO 11898-2 Bit rate of...

FC3-SC-2S FACET Card adds support for RS232, RS485 half/full duplex and can be configured independently....

FC3-S1C1 FACET Card adds support for DB9 with RS-232/485 + DB9 with CAN bus Specifications DB9 with RS-232/485 + DB9 with CAN bus. Serial port supports RS232, RS485 ha...

FT.F-M2NVME TEL providing M.2 Key-M for use of additional AI module in Tensor-I22. Includes advanced he...

FT.F-M2NVME TEL providing M.2 Key-M for use of additional NVMe/SATA/AI module in Tensor-I22. Includes a...

FT.T-SATA1 TEL providing SATA connector for up to 2 x 2.5" SSD/HDD devices in Tensor. Requires larger enclosure size of Tensor; select Height: EH35C. Note: a ribbon (TENSOR-ACC-RIB20) and a set of panels (TENSOR-ACC-PANELS) are require for TEL assembly.  ...

FT.S_GPIO TEL providing terminal block of 4 x GPIO and headers for up to 16 more ports with use of FT.S_GPIO TEL. Provides Isolated per UL 1577 GPIO input-output via USB CDC implementation. Switch selectable GPIO power level(3.3v / 5.0v). Unidirectional Isolation block....

TEL providing 1 x RS232/RS485 by DB9 and connectors for up to 3 more ports with use of FT.HB-DB9 Note: a ribbon (TENSOR-ACC-RIB20) and a set of panels (TENSOR-ACC-PANELS)...

FT.Q-CAN TEL providing 1 x CANBus via DB9 connector in Tensor. Supports CAN 2.0A Specifications and ISO 11898-2. Bit rate of up to 1Mbit/s. CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded. Driv...

FT.I-M2B TEL providing an M.2 Key-B socket for use of additional cellular modem with Tensor-I22. Includes: SIM card tray, 2 x Pentaband antennas, 2 x MHF cables, and 2...

FT.J-M2E TEL providing an M.2 Key-E socket for use of additional Wi-Fi module with Tensor-I22. Includes: 2 x Wi-Fi antennas, 2 x MHF cables, and 2 x side panels. Does not include Wi-Fi mod...

FT.L-PCIEmini TEL providing a mini PCIe socket with SIM card tray + 2x Pentaband antennas (each with a panel and U.FL cable) Does not include SIM or module. SIM card tray is accessible externally. Note: a ribbon (TENSOR-ACC-RIB20) and a set of panels (TENSOR-ACC-PANELS) are require for TEL a...

FT.HA-SER1 TEL providing 1 x RS232 port by DB9 is utilizing a USB2 interface Specifications Using DB9 connector. Implemented using FTDI FT4232H Each port su...

FT.HB-DB9 TEL providing 1 x RS232/RS485 port by DB9. Only for use with FT.H-SER4. Up to 3 x FT.H...

FT.CB-LAN10G2 TEL for additional 2 x 10 Gbit Ethernet by RJ45 in Tensor-I22/Tensor-I20. Using RJ45 ports. Note: a ribbon (TENSOR-ACC-RIB20) and a set of pa...

FT.C-LAN2 TEL for additional 2 x Gbit Ethernet by RJ45 in Tensor-I22. Specifications: 2 x Gbit Ethernet port Using Intel i210 on an independent PCIe lane. Using RJ45 po...

FT.W-OPLN2 TEL providing 2 x SPF+ sockets for optical GbE in Tensor. 2 x 1Gbps SFP/SFP+ transceiver Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps). Note: a ribbon (TENSOR-ACC-RIB20) and a set of panels (TENSOR-ACC-PANELS)...

FT.V-TERM4 TEL providing 4 x GPIO by terminal block. Only for use with FT.S-GPIO. Up to 4 x FT.V-TERM4 can be used with FT.S-GPIO to provide up to 20 x GPIO. Note: a...

FT.EC-USB2V4 TEL for additional 4 x USB 2.0 type A in Tensor-I22 Specifications: 4 x USB 2 type A vertical connectors Note: a ribbon (TENSOR-ACC-RIB20) and a set of panels (TENSOR-ACC-PANELS)...

FT.EA-USB3V4 TEL for additional 4 x USB 3.0 type A in Tensor-I20 and Tensor-I22. Note: a ribbon (TENSOR-ACC-RIB20) and a set of panels (TENSOR-ACC-PANELS) are require for TEL assembly....

FT.ED-USB3PCIV4 TEL for additional 4 x USB 3.1 type A in Tensor-I22. PCIe interface. Note: a ribbon (TENSOR-ACC-RIB20) and a set of panels (TENSOR-ACC-PANELS) are require for TEL assembly. &nb...

Type: Wide FACET Card Technical documentation: http://www.fit-pc.com/wiki/index.php/Fitlet2_FACET_Cards#FC-OPLN Properties: Supported 1Gbps SFP/SFP+ transceiver LEDs: LAN SFP link/activity indication Right LED: continuous green=link | blinking gre...

FC-PCI has mini-PCIe socket (with connected SIM-card socket) + E-Key M.2 socket + M-Key M.2 socket 2280/2260 The common use cas...

FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port. fitlet2 with FC-POED can be powered...

FC3-POED FACET3 Card Features: 802.3af/802.3at compliant PoE device port with Gbit Ethernet (Intel i210) FC3-POED allows powering fitlet3 from a POE source while providing a 3rd Gbit Ethernet port. Specifications Ethernet controllers: Intel I210 GbE...

FC-SCG adds CANbus, RS232/RS485 serial port and general-purpose I/O FC-SCG is a Narrow FACET-Card and includes the following socket: M.2 E-key 2230 (usually used for WiFi adapter) Notes:...

FC3-FOPLN SFP+ socket for optical GbE connection Mu...

FC-USB adds 4 USB2 ports to fitlet2 for a total of 8 ports (2x USB3 + 6x USB2, all type-A connector) FC-USB has an M.2 key-E sock...

20cm ribbon (flexible flat cable)  necessary for TEL connection

4x 2.5GbE on RJ45 with PoE PSE power delivery Type 1 (15.4W per port)

4x FPD Link IV deserializer on FAKRA Z with PoC power delivery (FFPD)

4x GMSL2 deserializer on FAKRA Z with PoC power delivery

Tensor-I22 AIH (Hailo-8 M.2 Key-M module)